How to Replace iSight Rear Camera for iPhone 6?

You iPhone 6 iSight Rear Camera got blurry or unusable? This article will illustrate how to repair and replace the back camera of iPhone 6 in details.
Step 1: Please make sure that you have powered off your iPhone before disassembly. Remove the two Pentalobe screws at the bottom next to the Lightning connector.

1

Step 2: Use a convenient suction cup opening tool to safely open the iPhone 6. Details about how to use this device, please click here.

23
Step 3: After pop open the mobile phone, pull the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge. (Kindly note: Please keep front panel supported at a 90º angle in relation to the rear case until you remove it. Otherwise, you may damage the connectors.)

45

67
Step 4: Remove the five Phillips screws securing the front panel assembly cable bracket.

8
Step 5: Remove the front panel assembly cable bracket from the logic board.

9
Step 6: Then, use a tool – spudger to disconnect the front-facing camera, sensor cable connector, home button cable connector, digitizer cable connector, and display data cable connector.

1011

1213

1415

1617
Step 7: Now you can remove the front panel assembly from the rear case.

18
Step 8: Remove the Phillips screws from the battery connector bracket, seeing below:

19
Step 9: Remove the metal battery connector bracket from the iPhone.

20
Step 10: Use a prying opening tool to gently pry the battery connector up from its socket on the logic board.

21
Step 11: Remove any tape covering the upper left rear-facing camera screw.

2223
Step 12: Use a spudger to lift the rear-facing camera connector up off of its socket on the logic board.

2425
Step 13: Remove the following Phillips screws from the rear-facing camera bracket.

26
Step 14: Remove the rear-facing camera bracket.

2728
Step 15: Remove the rear-facing camera from the iPhone.

2930
After replace a new camera, you can reassemble your phone in the reverse order.

Advertisements

About hytparts

I don't know what your objects, but mine is sharing and communicating with you who also like diying cell phones. It is really a great experience for me, which can make me more confident. And I will continue searching for and collecting the cell phone replacement repair parts and accessories for DIYing, to keep my cell phone new and excellent.
This entry was posted in Apple iPhone iPad iPod, Hytparts Blog and tagged , , . Bookmark the permalink.

2 Responses to How to Replace iSight Rear Camera for iPhone 6?

  1. P-O Bengtsson says:

    How do i replace a broken glass on the rear camera?

    • hytparts says:

      Glad to explain for you!
      Firstly you should disassemble the rear camera module. The steps are the same with what this post inlustrated. After removing the rear camera module, you can see a metal bracket on the camera slot. You need to pry up the bracket from camera slot. Then push the broken glass out.(Please be careful here, do not bend the rear housing.) Replace the broken one with a new one and use glue to fix around the glass edge. Then put the bracket back and reassemble your phone according to the steps in the reverse order in this post.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s